Hallo zusammen,
mal eine Frage.
Warum kann ich bei Alcohol, wenn ich ein DVD Image erstellen möchte, nicht die Geschwinkeit beim Einlesen angeben??
Der ließt immer mit MAX. ein.
Laufwerk ist ein Pioneer Dvr-216L oder ein Nec-3500.
Bei allen anderen LW geht das auch nicht.
Wie kann man das denn einstellen?
Der Button, wo die Geschwindkeit hinterlegt ist, uter dem LW Anzeige, ist grau hinterlegt.
Also keine Möglichkeit etwas auszuwählen.
Danke für Eure Hilfe
MFG
DVD Geschwingkeit beim Image erstellen
Started by
djsven
, Aug 31 2009 07:20 AM
3 replies to this topic
#1
Posted 31 August 2009 - 07:20 AM
#2
Posted 31 August 2009 - 09:52 PM
QUOTE (djsven @ Aug 31 2009, 03:52 PM) <{POST_SNAPBACK}>
Hallo zusammen,
mal eine Frage.
Warum kann ich bei Alcohol, wenn ich ein DVD Image erstellen möchte, nicht die Geschwinkeit beim Einlesen angeben??
Der ließt immer mit MAX. ein.
Laufwerk ist ein Pioneer Dvr-216L oder ein Nec-3500.
Bei allen anderen LW geht das auch nicht.
Wie kann man das denn einstellen?
Der Button, wo die Geschwindkeit hinterlegt ist, uter dem LW Anzeige, ist grau hinterlegt.
Also keine Möglichkeit etwas auszuwählen.
Danke für Eure Hilfe
MFG
mal eine Frage.
Warum kann ich bei Alcohol, wenn ich ein DVD Image erstellen möchte, nicht die Geschwinkeit beim Einlesen angeben??
Der ließt immer mit MAX. ein.
Laufwerk ist ein Pioneer Dvr-216L oder ein Nec-3500.
Bei allen anderen LW geht das auch nicht.
Wie kann man das denn einstellen?
Der Button, wo die Geschwindkeit hinterlegt ist, uter dem LW Anzeige, ist grau hinterlegt.
Also keine Möglichkeit etwas auszuwählen.
Danke für Eure Hilfe
MFG
Hallo djsven,
bitte poste deine Logdatei (System Report) hierrein. Danke!
#3
Posted 01 September 2009 - 12:00 AM
Hi, wurde jetzt mit einem dritten DVD LW getestet. Ist zwar kein RW, sollte aber dennoch möglich sein,
die LW Geschwindigkeit beim Lesen zu ändern.
Danke euch.
################## Detailed Information of Device(s) ##################
///////////////////////////////////////////////////////////////////////
(D:) HL-DT-ST DVDRAM GSA-4080N(0:0) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: HL-DT-ST
Product Identification: DVDRAM GSA-4080N
Production Revision Level: 0X21
Location: atapi, Port 0, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), DVD DAO
BURN-Free Technology: Unknown
Auto-Select best write speed: Not Supported
*** NOT listed in Alcohol's database. Please report to development team
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/Yes
DVD-RAM Read/Write: Yes/Yes
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: No
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: No
R-W De-interleaved and Corrected: No
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
#######################################################################
########################### Options Setting ###########################
Devices control interface: Default Driver Control Interface
CPU Priority Level: High
Memory Buffer Size (MB): 256
Examine the accuracy of data read from physical device: Yes
Enable Enhanced Weak Sector Scanner during dumping: No
Overburn disc(s): No
Turn off "Auto-Select best write speed" function if possible: No
Fill memory buffer before recording discs: Yes
Book Type DVD+R/DVD+RW disc as DVD-ROM while burning: No
Ignore Media Type: No
RMPS (Recordable Media Physical Signature) Emulation: No
BAD Sectors Emulation: No
Sub-Channel Data Fixed & Emulation: No
Laserlock Emulation: No
Current Language: German
die LW Geschwindigkeit beim Lesen zu ändern.
Danke euch.
################## Detailed Information of Device(s) ##################
///////////////////////////////////////////////////////////////////////
(D:) HL-DT-ST DVDRAM GSA-4080N(0:0) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: HL-DT-ST
Product Identification: DVDRAM GSA-4080N
Production Revision Level: 0X21
Location: atapi, Port 0, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), DVD DAO
BURN-Free Technology: Unknown
Auto-Select best write speed: Not Supported
*** NOT listed in Alcohol's database. Please report to development team
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/Yes
DVD-RAM Read/Write: Yes/Yes
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: No
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: No
R-W De-interleaved and Corrected: No
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
#######################################################################
########################### Options Setting ###########################
Devices control interface: Default Driver Control Interface
CPU Priority Level: High
Memory Buffer Size (MB): 256
Examine the accuracy of data read from physical device: Yes
Enable Enhanced Weak Sector Scanner during dumping: No
Overburn disc(s): No
Turn off "Auto-Select best write speed" function if possible: No
Fill memory buffer before recording discs: Yes
Book Type DVD+R/DVD+RW disc as DVD-ROM while burning: No
Ignore Media Type: No
RMPS (Recordable Media Physical Signature) Emulation: No
BAD Sectors Emulation: No
Sub-Channel Data Fixed & Emulation: No
Laserlock Emulation: No
Current Language: German
#4
Posted 01 September 2009 - 08:14 PM
Du solltest schon die ganze Logdatei rein kopieren
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users