Jump to content


Photo

New starforce trick!!!


  • Please log in to reply
4 replies to this topic

#1 Jackie

Jackie

    100% Member

  • Members
  • PipPipPipPipPip
  • 442 posts

Posted 23 October 2005 - 03:49 PM

The link below will speak now...
[url=http://[/url]

Edited by Robbo, 23 October 2005 - 04:18 PM.


#2 Robbo

Robbo

    Forum Administration

  • Administration
  • 6,740 posts

Posted 23 October 2005 - 04:18 PM

has the link spoken i havent heard a thing also with regards to external links to other Sites there is something in the guidelines.

1. No links to outside URLs are allowed. They will be deleted from your post.

#3 Charalambos

Charalambos

    Support Team Member

  • Support Team
  • 5,005 posts

Posted 23 October 2005 - 05:00 PM

QUOTE
The link below will speak now...


In fact it's a greek expression. When we want to say that something is apparent we say that "the thing speeks itself". smile.gif

#4 Tron

Tron

    120% Member

  • +Alcohol-Customer
  • 4,156 posts

Posted 24 October 2005 - 04:04 AM

I think the point was
QUOTE
1. No links to outside URLs are allowed. They will be deleted from your post.


#5 Jackie

Jackie

    100% Member

  • Members
  • PipPipPipPipPip
  • 442 posts

Posted 24 October 2005 - 01:39 PM

Sorry for the mistake sorry.gif Thanks Charalambos for correction me...I dont know very good English.................. blush.gif

Ok, then....

This is something i just came across and its called SFSECURE

taken from the readme

As some of you know by now a tool called sfcure has been released on a
well known site. There a versions of this tool avaiable. One is a bit
older than the other one. I tested the newer one. Here is a little manual
for you all.

1. Unzip sfcure01.zip
2. doubleclick !setup.bat to install the driver and press "ok" to put the
needed information into your registry
3. restart your computer
4. to start the driver doubleclick !start.bat (to stop it after use
doubleclick !stop.bat)
5. Get yourself a copy of Splinter Cell Chaos in mdf/mds format made with
Alcohol 120%. The mds-file has to contain the DPM-information (DPM= Data
Position Measurement) and the mdf-file has to one big non-splitted image.
A image splitted into for example 2 gig segments wont work, at least it
didnt work for me. The mdf-filesize for Splinter Cell Chaos Theory is 4,15
gigabyte for me.
6. Mount the image and install the game.
7. Start Starforce Nightmare 1.12 and disable your internal ide-Cd and
DVD-drives and also disable node.
8. Now start the game while the sfcure-driver is started and starforce
will verify that the mounted image is real. (Some of you maybe have to
restart your computer because Starforce tells you to do this)
9. Enjoy Splinter Cell Chaos Theory without an USB-drive!

Btw: The above mentioned method has also been tested by me on the following
games 1944: Battle of the Bulge, Panzers: Phase Two, Cross Racing Championship
2005 and Trackmania: Sunrise. I can personally confirm that I played them without
a problem.

Also a short note on Starforce Nightmare 1.12. From starforce version 3.5.XX.XX
and further you cant use Starforce Nightmare to disable your internal ide-CD and
DVD-drives. In such a case you have to manually remove the powercable from your
drives. But you still have to use Starforce Nightmare to disable node, because this
is needed to hide your virtual drives.

I hope this manual helps some of you without an USB-drive to play Splinter Cell
Chaos Theory and other SF-titles, while we wait for Daemon Tools 4. I also hope that
some clone-groups release high-DPM versions of newer SF-titles such as Bet on Soldier
or the upcoming Brothers in Arms.

Here is the Link,Testers Welcome
Link removed by Admin, anybody needing the Link please contact Jackie.

Please Note:
any damage to your Computer using such programs are your own fault and not Alcohol-Softs.

Ihave Brian lara 2005 protected by the same which i am going to try this on,will post back results

Ihope i didnt Violate any Rules,do excuse me if i did,just trying to Help

Edited by Robbo, 24 October 2005 - 03:13 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users