The LG GSA-H22N with not support by alochol, can update the driver information.
The LG GSA-H22N with not support by alochol 120%
Started by
Trial User_abccom_*
, Oct 08 2006 09:09 AM
7 replies to this topic
#1 Trial User_abccom_*
Posted 08 October 2006 - 09:09 AM
#2
Posted 08 October 2006 - 10:11 AM
1. You must post a system report from within Alcohol in order to receive support.
2. I suppose that you want to say that you can not update the driver information, but what do you mean exactly? Do you have a problem with your drive and Alcohol and, if yes, can you give some details about it?
2. I suppose that you want to say that you can not update the driver information, but what do you mean exactly? Do you have a problem with your drive and Alcohol and, if yes, can you give some details about it?
#3 Trial User_abccom_*
Posted 09 October 2006 - 10:09 AM
Thx,
because the report say
Vendor Identification: HL-DT-ST
Product Identification: DVD-RAM GSA-H22N
Production Revision Level: 1.00
Location: atapi, Port 1, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), DVD DAO
BURN-Free Technology: Unknown
Auto-Select best write speed: Not Supported
*** NOT listed in Alcohol's database. Please report to development team
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/Yes
DVD-RAM Read/Write: Yes/Yes
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: No
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: No
R-W De-interleaved and Corrected: No
C2 Pointers Support: No
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
because the report say
Vendor Identification: HL-DT-ST
Product Identification: DVD-RAM GSA-H22N
Production Revision Level: 1.00
Location: atapi, Port 1, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), DVD DAO
BURN-Free Technology: Unknown
Auto-Select best write speed: Not Supported
*** NOT listed in Alcohol's database. Please report to development team
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/Yes
DVD-RAM Read/Write: Yes/Yes
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: No
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: No
R-W De-interleaved and Corrected: No
C2 Pointers Support: No
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
#4
Posted 09 October 2006 - 01:17 PM
Please post a complete system report, not an edited one. Thanks.
#5
Posted 11 October 2006 - 11:50 AM
system report removed by ptolomeus3
Thank you. Your request has been send to the Devs.
Thank you. Your request has been send to the Devs.
#6 Trial User_abccom_*
Posted 12 October 2006 - 02:10 AM
Thank you
#7
Posted 13 October 2006 - 12:31 PM
#8
Posted 14 October 2006 - 10:15 AM
Hallo abccom,
Thanks, I deleted your post. Your e-mail address shouldn´t be there for everybody to see.
Thanks, I deleted your post. Your e-mail address shouldn´t be there for everybody to see.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users